field_remote_option

field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

OUTSIDE IR35In this full time permanent position, you will, acing as a Senior Mechanical Engineer in the London office, predominantly focus on delivering UK Government Defence Projects.This role will make a difference to our business and team in the &nbsp;following ways:Responsibly of the delivery of engineering services from design through to construction. Project Leader responsible for the delivery of medium and large sized single and multi-disciplinary projects.This role primarily works independently applying deep technical knowledge and skills on large/complex projects. May be involved in mentoring less experienced team members, act as a Project Leader responsible for project performance over time and/or manage a small team (typically 1-2 direct reports).&nbsp;−&nbsp;&nbsp;&nbsp; Co-ordinate and plan commitments, resources and balance workload across available projects to efficiently and effectively meet project deadlines and cost/fee requirements.&nbsp; &nbsp;−&nbsp;&nbsp;&nbsp; Monitor workload and advise line manager where additional skills are required, and when over/under utilisation is likely to occur.&nbsp; &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; − &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitors spend against proposal for own projects handled and identifies variances for discussion.&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; − &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Addresses non-conformance within project timescales to ensure timely delivery.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; − &nbsp;&nbsp; Drive the collection of unpaid fees with assistance from accounts&nbsp;−&nbsp;&nbsp;&nbsp; Build and maintain client relationships to secure new work by actively marketing NDY’s services. As required, creates submissions and presentations that effectively markets NDY and accurately addresses the client’s perspective.&nbsp;Accountabilities&nbsp;&nbsp;− &nbsp; Design and document systems through concept, design development and detailed documentation phases.&nbsp;−&nbsp;&nbsp;&nbsp; Act as Project Leader on assigned projects, which may require the nomination of project engineers and reviewers for projects where appropriate.&nbsp;Plan and resource projects to ensure all NDY activities and designs are fully coordinated and implemented in line with NDY’s Project Management methodology.&nbsp; &nbsp;&nbsp;<ul><li>Assist the Project Leader on assigned projects – responsible for the firm’s overall involvement on the project and the administration of design interface between multiple disciplines.</li><li>Demonstrate ability to effectively communicate with staff at all levels including a proven ability to communicate with technical staff across multiple disciplines.</li><li>Demonstrate ability to effectively communicate with clients.</li><li>Have highly developed verbal communication skills.</li><li>Excellent interpersonal skills.</li><li>The ability to exercise substantial initiative and high level judgement and to work independently to meet objectives.</li><li>Well developed problem solving skills.</li><li>Demonstrate an appropriate level of technical competence.</li></ul>You will be expected to &nbsp;&nbsp;&nbsp;&nbsp;<ul><li>Support our brand in the market by providing superior client service and promoting our interests and reputation&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Play an active role in ensuring a harmonious, safe and productive work environment for yourself and others in the workplace by maintaining a high standard of performance and conduct in accordance with company Values, Code of Conduct, policies and procedures and reasonable business directives.&nbsp; &nbsp;&nbsp; </li><li>Act as the project leader for internal multi-disciplinary engineering project teams, predominantly for London based commercial office projects&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Represent the company at external project meetings with the client and external design teams&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Mechanical building services engineering consultancy and design for large scale projects up to RIBA Stage 4A&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Co-ordinate mechanical services designs with other building services disciplines and with external parties including architects and structural engineers&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Project management including resourcing and managing project finances&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Manage multiple projects and successfully dealing with conflicting obligations&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Ensure that the Quality System is implemented and maintained on projects&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Develop Project Leader skills in line with work opportunities&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Participate in developing the Mechanical team technical capability&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Take part in personal and professional development training as required&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;</li><li>Assist in developing technical capability of more junior Mechanical Engineers&nbsp; Qualifications &amp; Certifications&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;&nbsp;</li><li>A minimum of 5 years (ideally 8-10) engineering experience in the field of mechanical building services design&nbsp;</li><li>A recognised mechanical engineering qualification&nbsp; Skills &amp; Experience: &nbsp;&nbsp;&nbsp;&nbsp;</li><li>Previous project leader/project management experience with multi-disciplinary project teams, including managing project resources and project finances&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Experience designing commercial office buildings.&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Highly effective communication skills, both written and verbal&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Strong interpersonal skills, including the ability to effectively communicate with staff at all levels as well as with different technical backgrounds&nbsp; &nbsp;&nbsp;&nbsp; </li><li>The ability to exercise substantial initiative and high-level judgement and to work autonomously to meet objectives&nbsp; &nbsp;&nbsp;&nbsp; </li><li>Familiarity with the full range of RIBA design stages, from Stage 1 right through to Stage 4A tender design&nbsp; &nbsp;&nbsp;&nbsp; </li><li>A working level understanding of other engineering disciplines including electrical, public health and fire protection is highly desirable&nbsp; &nbsp;</li></ul>

Project Engineer - Mechanical (SC Cleared)

Morson are looking to recruit electrician’s mates/cable pullers for our client in Govan.&nbsp;These are 9 month contracts with a strong likelihood of extensionRole description:A semi-skilled person responsible for supporting cable installation including cable reeve, cable supports and gland packing. Other ancillary responsibilities may include the cleanliness and care and protection of all areas of the ship including all fitted equipment. You must have electrical background for this role.Core duties:Electrical background Cable containment&nbsp; Cable installation and reeving&nbsp; Chunking and supports Cable packing systems Upkeep of shipyard facilities&nbsp;Shift patterns can vary:Standard - Locals: £17.01 PAYE&nbsp; &nbsp; &nbsp; &nbsp;Non locals: £25.06 PAYE&nbsp; (Umbrella rates also available)Nights - Locals: £22.69 PAYE&nbsp; &nbsp; &nbsp; Non locals: £30.69 PAYE (Umbrella rates also available)Full rate card available on requestNo less than 37 hours worked a weekOvertime available but not guaranteed33 days holiday inclusive of bank holidaysThese are immediate starts subject to security clearance. Starts will be ongoing and over the next few months.If you are interested, please attach an up to date, task specific CV in the first instance and I will call you for a chat.Morson is acting as an employment business in relation to this vacancy.

Electricians Mates

The successful candidate will be required to perform tasks suitable to the internal level of this role. The role will contain, but will not be limited to, the following: Undertake and complete tasked maintenance &amp; diagnostic activities on an aircraft or components which may include, as appropriate, Aircraft Ground Handling, flight servicings, aircraft role changes, AD embodiments, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Reviews operational performance of aircraft components &amp; systems. Analyse and diagnose faults to components &amp; assemblies, apply diagnostic skills &amp; knowledge to effect repairs or modify equipment or suggest improvements to procedures. Ensure that maintenance is undertaken to schedule and resolve any issues, escalate as required. Demonstrates a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately. Maintain personal task competencies for working on aircraft or components. Undertake support tasks within the Aircraft or component maintenance facility which are required to maintain compliance with the MOE and Functionally Mandated procedures (e.g. oversight checks, control of tooling / test equipment etc.). Receive On The Job training activities and maintain personal Log Book for currency and recency Requires broad and in-depth product knowledge / competency within own technical / subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application. Ensure personal compliance with the risk assessments, SHE policies and procedures. If approved as a designated assessor undertake OJT activities, qualified by undertaking an OJT Training and Assessor course or acceptable equivalence, referenced in PROQ30718 Signs for own work. If BAE Systems licensed all work must be certified in line with ADS. If unlicensed all work must be certified by a BAE Systems Military Aircraft Maintenance licence holder, other than when ADS allows for self certification. May certify for others if completed 2nd signature pack or supervisory assessment by the LOD holder. Undertake specific activities in line with Authorities granted by the Maintenance Manager.Typically 3+ years experience including type, classed as fully competent with all required ‘Authorities’ in place. Demonstrating breadth of systems experience, currency &amp; recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft or in workshops. A knowledge of the Functionally Mandated Procedures Requires broad and in-depth product knowledge / competency within own technical / subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application. Ensure personal compliance with the risk assessments, SHE policies and procedures. If approved as a designated assessor undertake OJT activities, qualified by undertaking an OJT Training and Assessor course or acceptable equivalence, referenced in PROQ30718 Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering, or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Aircraft platform training (on a/c requirement)WORKING HOURS – ON BASE - 5 days p/wk (Mon-Fri) around relevant site core hours (7.30am – 4.30pm Mon – Thurs, 7.30am – 12pm Fri). - Hours required to work per week are 37.00 unless otherwise stated (this does not include lunch breaks). - Start and finish times to be agreed with local Line Management, in accordance with local site core hours. - Lunch break allowance is 30 minutes between 12.30 – 1:00pm (or as agreed with Line Manager). 30 mins will automatically be deducted each working day by the electronic time management system. - Dependant on workload, local management may request more or less hours are worked within this contract. - Candidates should be aware that this position may involve shift work Nightshift pattern Days: 07:30 till 16:00hrs and Nights: 16:00 to 02:00hrs, this is a 6 month contract initially.

Avionic Technician

Morson Talent are recruiting for Mechanical fitters to work with our client, providing specialist engineering services on-site at Rosyth dockyard in Scotland.Key AccountabilitiesDay-to-day, you’ll be expected to undertake general Mechanical Fitter activities, including below:<ul><li>Work to engineering drawings and technical specifications</li><li>Remove, overhaul and install a variety of mechanical equipment which could</li><li>Include hydraulics, water and fuel systems and LP/HP air</li><li>Assist commissioning teams with setting to work</li><li>Install and align the overhauled equipment</li><li>Work alongside OEM reps on equipment</li></ul>As well as daily routine maintenance checks, you will be expected to plan and execute operations in a safe and controlled manner on behalf of the company in accordance with the HSE at Work Act and job-specific method statements. You will take ownership of activities and processes within your manufacturing remit and ensure safe working practices are adhered to at all times under a “safety first” culture.Key Competencies<ul><li>Clear understanding of the need for an exceptional S.H.E. culture.</li><li>Possess drive, enthusiasm and determination.</li><li>Outgoing personality with the ability to influence individual and group behaviour.</li><li>Resilient, not easily put off when the going gets tough.</li><li>Excellent communicator and able to build productive working relationships.</li><li>Participate in Company Change/Safety objectives.</li><li>Be self-motivated</li></ul>Qualifications/Experience<ul><li>Recognised Mechanical Engineering apprenticeship qualified to SVY level 3 (or NVQ and C&amp;G equivalent) or HNC and above in a Mechanical Engineering discipline with industry experience.</li><li>Previous Mechanical fitter experience within a maintenance or ship environment.</li><li>Ability&nbsp;to understand and read drawings, think on your feet and problem solve with a high attention to detail and fault finding.</li><li>Ability to demonstrate attention to detail and a focus on producing high-quality work to meet acceptance standards.</li><li>Experience in Maintenance procedures, Risk Assessments, Method statements, COSHH assessments and Safe Systems of Work with excellent teamworking skills.</li></ul>Systems installation covering<ul><li>Shaft-line</li><li>Power Generation</li><li>Prime movers</li><li>Assorted valves, pumps, propellers and rudders</li><li>Removal of mechanical equipment</li></ul>36 standard hours per week, with overtime possible.Full SC clearance is a requirement for this role.

4 Manufacturing Occupations Contractor Jobs