field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

This role involves the preparation, refinishing, and painting of aircraft and aircraft components to strict aviation standards. You’ll be working as part of a dedicated coatings team, applying high-spec finishes and working from approved data manuals and technical drawings.Location: Cambridge Rates: £26.29 PAYE / £36.17 Umbrella Schedule: 554 ShiftKey Responsibilities:Apply aviation coatings to aircraft and aircraft componentsChemically strip surfaces as part of the preparation processApply specialist finishes including primers and topcoatsMask and demask components to protect during processingWork at height and in confined spaces where requiredInterpret and work from technical drawings and data manualsAdhere to health, safety, and environmental standardsOperate spray guns and surface preparation equipmentEnsure all work meets quality and compliance requirementsQualifications &amp; Experience:Recognised apprenticeship (e.g. RAF, Aerospace MRO)City &amp; Guilds in Surface Finishing or related tradeManufacturer/OEM training certificates (desirable)Minimum 2 years’ experience in an MRO or specialist paint facilityKnowledge of aircraft materials, coatings, and corrosion controlIf you’re an experienced Aircraft Painter looking for your next opportunity in aerospace, apply now or contact us for more information.

Aircraft Painter

JOB PURPOSE The Test and Repair Engineer is responsible for ensuring that the spare assets are available in the correct location, at the correct time and are configured to the correct build standard. This will involve undertaking asset repairs as well as managing repair Agents and Vendors to ensure optimum spares stock is maintained.MAIN ACTIVITIES AND TASKS The Test and Repair Engineer is responsible for all aspects of the return of suspect equipment from the field allocated to them. This may include updating the history within the Service Management Tool / CMDB, Engineering evaluations, verifying failure modes, dispatching to OEM for repair, where possible undertake in-house repairs, return of items into spare’s store / field. This includes • Facilitate investigation and repair of spare assets returned from the Field Support Engineers • Testing new items or loading / reloading items with software / firmware / BIOS / IOS, etc. • Updating repair history in the CMDB, functional test and build standard checks, generation of test reports returning serviceable items to spares storage locations • Respond to requests for work from the Service Desk, and Management Team, updating stock and repair history • Goods in-wards receipting and inspection of all items delivered to the business • Ensuring that the allocated Test and Repair functions are carried out in accordance with issued processes and procedures in an efficient manner • Liaising with Suppliers / Manufactures regarding warranties and repairs • Establishing and maintaining correct build standard of new and returned items • Liaising with the logistics supplier and FSE’s to ensure required stock levels are maintained in the field • Interfacing with the Service Desk Agents and the service management tool to accurately record all actions undertaken• Provide comprehensive failure reports detailing the investigation, fault resolution and any follow up work that may be necessary • Collaboration with Service Management Teams, Project Teams and the Customer to ensure effective customer focused resolution of repairs • Creation and maintenance of documentation relevant to supported products • Undertake stock audits across various spares locations • Accurately record and submit (within a timely manner) all routine documentation including timesheets and other work related administration • Responsibilities will vary according to the changing requirements of the business • There will also be occasional requirements to undertake other Engineering related activities in the field appropriate to skill setApplicants will ideally have working knowledge of the following: • Experience working in an electrical / mechanical technical workshop • Broad (but not deep) IT knowledge • Ability to accurately articulate technical work undertaken • Must have a strong understanding of working within a confidential environment • Team player with a proactive attitude • Flexibility in approach and willingness to take on new challenges combined with the ability to work under pressure in a demanding environment

Test & Repair Engineer

Our client provides MAA Part 145 Aircraft support to the RAF A400M (Atlas) fleet. They have an exceptional opportunity for a highly motivated career focused and ambitious Aircraft Fitter seeking a role in a challenging, fast-paced and rewarding environment. Our aim as a team is to attract and develop key talent across all levels of our growing aviation business. Duties and responsibilities are, but not limited to the following:General Responsibility As an Aircraft Fitter you will be responsible for Maintenance, Repairs and Modifications to the aircraft. Your responsibilities will include, but are not limited to: - &nbsp;? Compliance with the organisational policies and procedures detailed in the MOE and supporting manuals &nbsp;? Identifying and rectifying existing and potential unsafe conditions &nbsp;? Maintaining the work environment in a clean and safe manner using a “clean as you go” approach &nbsp;? Complying with company Safety Management System (SMS) occurrence reporting procedures &nbsp;? Complying with the safety policy &nbsp;? Complete aircraft paperwork to a high standard &nbsp;? An awareness of COSHH, Working at height and Manual handling safety requirements &nbsp;? Actively embrace a Continuous Improvement (CI) cultureEssential Job Function &nbsp;? Responsible for the maintenance of the aircraft and safe use of ground equipment &nbsp;? Can accurately navigate and interpret aircraft maintenance documentation. &nbsp;? Carry out aircraft modifications and light structural work if required.Candidate Essential Requirements &nbsp;? Must hold a valid aircraft standards-based qualification (Apprenticeship/NVQ level 3) or aircraft related academic qualification/traineeship with a minimum 3 years recorded experience or be able to satisfy Training / Maintenance management team. &nbsp;? Current Human factor initial and refresher, EWIS and SFAR 88 certificate &nbsp;? Knowledge of aeronautical regulations &nbsp;? Must have the right to live and work in the United Kingdom &nbsp;? Fluency in English, both written and verbal &nbsp;? Be able to successful complete MOD security clearanceDesirable Criteria &nbsp;? Experience on A400M, Propeller or Wide body Aircraft &nbsp;? Previous exposure to AirN@v and Amos &nbsp;? Knowledge of Military Aviation Authority (MAA) MRP Part 145 regulations &nbsp;? Have good communication skills, both verbally and written, and interpersonal skills &nbsp;? A proven ability to work as part of a team &nbsp;? Be able to work on their own initiative and demonstrate leadership skills &nbsp;? Possess proficient organisational skills and an ability to work in an efficient manner &nbsp;? IPAF/MEWP familiarisationTypical Working Conditions &nbsp;? Primarily based in Brize Norton however travel may be required &nbsp;? Shift will be 5x5x4 - 0700-1900 &nbsp;? PPE is provided and its use is mandatory in the performance of your work.Duration: 1 year contract, rolling Hours: 5x5x4 shift approx. 40 hours per week with potential overtime - 07.00 to 19.00 Pay: £30 ph umbrella and £23.24 PAYE

Aircraft Fitter

Morson are currently looking for Avionic Technicians for RAF Coningsby. Please find the details below for the role.&nbsp;The successful candidate will be required to perform tasks suitable to the internal level of this role. The role will contain, but will not be limited to, the following: Undertake and complete tasked maintenance &amp; diagnostic activities on an aircraft or components which may include, as appropriate, Aircraft Ground Handling, flight servicings, aircraft role changes, AD embodiments, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Reviews operational performance of aircraft components &amp; systems. Analyse and diagnose faults to components &amp; assemblies, apply diagnostic skills &amp; knowledge to effect repairs or modify equipment or suggest improvements to procedures. Ensure that maintenance is undertaken to schedule and resolve any issues, escalate as required. Demonstrates a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately. Maintain personal task competencies for working on aircraft or components. Undertake support tasks within the Aircraft or component maintenance facility which are required to maintain compliance with the MOE and Functionally Mandated procedures (e.g. oversight checks, control of tooling / test equipment etc.). Receive On The Job training activities and maintain personal Log Book for currency and recency Requires broad and in-depth product knowledge / competency within own technical / subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application. Ensure personal compliance with the risk assessments, SHE policies and procedures. If approved as a designated assessor undertake OJT activities, qualified by undertaking an OJT Training and Assessor course or acceptable equivalence, referenced in PROQ30718 Signs for own work. If BAE Systems licensed all work must be certified in line with ADS. If unlicensed all work must be certified by a BAE Systems Military Aircraft Maintenance licence holder, other than when ADS allows for self certification. May certify for others if completed 2nd signature pack or supervisory assessment by the LOD holder. Undertake specific activities in line with Authorities granted by the Maintenance Manager.Typically 3+ years experience including type, classed as fully competent with all required ‘Authorities’ in place. Demonstrating breadth of systems experience, currency &amp; recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft or in workshops. A knowledge of the Functionally Mandated Procedures Requires broad and in-depth product knowledge / competency within own technical / subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application. Ensure personal compliance with the risk assessments, SHE policies and procedures. If approved as a designated assessor undertake OJT activities, qualified by undertaking an OJT Training and Assessor course or acceptable equivalence, referenced in PROQ30718 Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering, or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Aircraft platform training (on a/c requirement)WORKING HOURS – ON BASE - 5 days p/wk (Mon-Fri) around relevant site core hours (7.30am – 4.30pm Mon – Thurs, 7.30am – 12pm Fri). - Hours required to work per week are 37.00 unless otherwise stated (this does not include lunch breaks). - Start and finish times to be agreed with local Line Management, in accordance with local site core hours. - Lunch break allowance is 30 minutes between 12.30 – 1:00pm (or as agreed with Line Manager). 30 mins will automatically be deducted each working day by the electronic time management system. - Dependant on workload, local management may request more or less hours are worked within this contract. - Candidates should be aware that this position may involve shift work Nightshift pattern Days: 07:30 till 16:00hrs and Nights: 16:00 to 02:00hrs, this is a 6 month contract initially.

Avionics Technician

Morson Technical Services are currently seeking a HSE and Quality Support Technician to join the team at RNAS Culdrose on a permanent basis.JOB PURPOSEThe Health, Safety, Environmental Training (HSE-T) and quality support Technician is required to support the HSET Manager in implementing and monitoring safety, health, environmental, training and quality measures within IMOS. Ensuring compliance with regulations, promoting a positive and just safety culture, and assisting with various HSET and quality activities.MAIN ACTIVITIES AND TASKS<ul><li>Liaison with IMOS MRP 145 Safety manager.</li><li>Administration of HSE-T and Authorisations records, ensuring the currency of personnel within the database.</li><li>The production and publication of safety related documents (Risk Assessment, Safe Systems of Work, Meeting Minutes, etc.).</li><li>The production and publication of IMOS working instructions ensuring document configuration management applied through document lifecycles.&nbsp;</li><li>Conducting ergonomic training of staff (Manual Handling, DSE Ergonomics, annual video screenings etc.).</li><li>Advice and support to IMOS Material Services at Culdrose on matters of Quality Control.</li><li>Advising staff in the completion of Display Screen Equipment Assessments and raising any ergonomic issues to the Department/HSET Manager.</li><li>Conducting of HSE Inductions for new joiners and return to work catch up briefs post long term absence of staff.</li><li>Maintenance Human Factors (HF) Facilitator.</li><li>Liaising with various agencies such as the Clients HSE and training teams.</li><li>Participating in Quality and Health and Safety Audits.</li><li>Preparing reports on HSE performance, monitoring key performance indicators, and documenting relevant data such as near miss and accident records.</li><li>Staying up-to-date on relevant HSE legislation and the clients Policy (HSEP’s).</li></ul>KNOWLEDGE SKILLS AND EXPERIENCE<ul><li>IT literacy with knowledge of Microsoft Office applications, in particular the manipulation and use of Microsoft Excel to a high level. Training will be provided for specific applications.</li><li>Health and Safety Experience (NEBOSH National General Certificate).</li><li>ISO 9001 2015 Auditor.</li><li>Manual Handling Trainer (if not training will be given).</li><li>Human Factors Facilitator (if not training will be given).</li><li>Understanding of engineering criteria and processes underpinning airworthiness and safe operation.</li><li>Ability to communicate effectively with the ability to communicate at all levels.</li><li>Proven ability to present accurate information in a professional manner, teaching experience desirable.</li><li>Ability to work independently to meet or within a team to meet deadlines.</li><li>Well organised and self-motivated with a keen attention to detail and is ready to apply problem-solving skills to a variety of complex tasks.</li></ul>

HSE-T & Quality Support Technician

Morson Talent are currently seeking Aircraft Technicians on a contracting basis, based at RNAS Yeovilton.Principal Tasks - Carry out Flight Servicing and self-supervised routine maintenance on Merlin Mk4/4A.- To carry out routine servicing on Merlin Mk4/4A under supervision.- Under supervision, assist in the repair, modification, fault rectification and component functional tests of mechanical and avionics systems, pre &amp; post-embarkation maintenance, role changes and all other maintenance activities applicable to Merlin Mk4/4A.

Aircraft Mechanical Technician

<h2>Job Duties:</h2><ul><li>Supervise and coordinate mechacnial maintance activities for the Chinook aircraft</li><li>Ensure compliance with safety regulations and policies</li></ul><h2>Required Qualifications:</h2><ul><li>Proven experience in a supervisory role</li><li>Excellent communication and leadership skills</li><li>Ability to work well under pressure</li><li>Strong problem-solving abilities</li></ul>

Supervisor AC

The successful candidate will be required to perform tasks suitable to the internal level of this role. The role will contain, but will not be limited to, the following: Undertake and complete tasked maintenance &amp; diagnostic activities on an aircraft or components which may include, as appropriate, Aircraft Ground Handling, flight servicings, aircraft role changes, AD embodiments, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Reviews operational performance of aircraft components &amp; systems. Analyse and diagnose faults to components &amp; assemblies, apply diagnostic skills &amp; knowledge to effect repairs or modify equipment or suggest improvements to procedures. Ensure that maintenance is undertaken to schedule and resolve any issues, escalate as required. Demonstrates a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately. Maintain personal task competencies for working on aircraft or components. Undertake support tasks within the Aircraft or component maintenance facility which are required to maintain compliance with the MOE and Functionally Mandated procedures (e.g. oversight checks, control of tooling / test equipment etc.). Receive On The Job training activities and maintain personal Log Book for currency and recency Requires broad and in-depth product knowledge / competency within own technical / subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application. Ensure personal compliance with the risk assessments, SHE policies and procedures. If approved as a designated assessor undertake OJT activities, qualified by undertaking an OJT Training and Assessor course or acceptable equivalence, referenced in PROQ30718 Signs for own work. If BAE Systems licensed all work must be certified in line with ADS. If unlicensed all work must be certified by a BAE Systems Military Aircraft Maintenance licence holder, other than when ADS allows for self certification. May certify for others if completed 2nd signature pack or supervisory assessment by the LOD holder. Undertake specific activities in line with Authorities granted by the Maintenance Manager.Typically 3+ years experience including type, classed as fully competent with all required ‘Authorities’ in place. Demonstrating breadth of systems experience, currency &amp; recency via a Log Book (electronic or paper) capturing skills, knowledge and authorities for working on Aircraft or in workshops. A knowledge of the Functionally Mandated Procedures Requires broad and in-depth product knowledge / competency within own technical / subject area. Awareness of how the team integrates with others in order to achieve the overall objectives of the area and demonstrates an understanding of the requirement for continuous improvement and its application. Ensure personal compliance with the risk assessments, SHE policies and procedures. If approved as a designated assessor undertake OJT activities, qualified by undertaking an OJT Training and Assessor course or acceptable equivalence, referenced in PROQ30718 Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering, or Military equivalent apprenticeship / qualifications. Academic qualification for this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance or equivalent. Aircraft platform training (on a/c requirement)WORKING HOURS – ON BASE - 5 days p/wk (Mon-Fri) around relevant site core hours (7.30am – 4.30pm Mon – Thurs, 7.30am – 12pm Fri). - Hours required to work per week are 37.00 unless otherwise stated (this does not include lunch breaks). - Start and finish times to be agreed with local Line Management, in accordance with local site core hours. - Lunch break allowance is 30 minutes between 12.30 – 1:00pm (or as agreed with Line Manager). 30 mins will automatically be deducted each working day by the electronic time management system. - Dependant on workload, local management may request more or less hours are worked within this contract. - Candidates should be aware that this position may involve shift work Nightshift pattern Days: 07:30 till 16:00hrs and Nights: 16:00 to 02:00hrs, this is a 6 month contract initially.

8 Aerospace and Aeronautical Engineering Jobs in United Kingdom